Nominal Pipe Size (NPS): 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2 inch Outside Diameter: 10,3 - 73 mm (0,405 - 2,875 inch) Wall Thickness: 1,24 - 7,01 (0,049 - 0,276 inch) Notes: Steel Grades - TP 304, TP 304L, TP 316, TP 316L, TP 321 Technical requirements acc. to ASTM A 450. Size of pipes in accordance with ANSI/ASME B36.19M. The quality of pipes is ensured by manufacturing process and non-destructive test. Hardness of metal not less than 100 HB. Length tolerance of measured pipes not greater than +10 mm. Monitoring of continuity of metal by pneumotest with pressure of 6 bar is available. Intergranular corrosion test in accordance with ASTM A262, Practice E is available.

Sizes
NPS, inch	Outside Diameter, mm	Wall Thickness, mm	Max. Length, м
1/8	10,3	1,24; 1,73; 2,40	12
1/4	13,7	1,65; 2,24; 3,02
3/8	17,1	1,65; 2,31; 3,20
1/2	21,3	1,65; 2,11; 2,77; 3,73
3/4	26,7	1,65; 2,11; 2,87; 3,91
1	33,4	1,65; 2,77; 3,38; 4,55	10
1 1/4	42,4	1,65; 2,77; 3,56; 4,85
1 1/2	48,3	2,77; 3,68; 5,08
2	60,3	3,91; 5,54	7
2 1/2	73,0	5,16; 7,01

Mechanical properties
Steel Grade	Tensile Strength, N/mm2 (min)	Yield Strength, N/mm2 (min)	Elongation, % (min)
TP304	515	205	35
TP304L	485	170	35
TP316	515	205	35
TP316L	485	170	35
TP321	515	205	35

Chemical Composition (%, max)
Steel Grade	C	Si	Mn	Cr	Ni	Mo	S	P
TP304	0,08	0,75	2	18 - 20	8 - 11	-	0,03	0,04
TP304L	0,035	0,75	2	18 - 20	8 - 13	-	0,03	0,04
TP316	0,08	0,75	2	16 - 18	11 - 14	2 - 3	0,03	0,04
TP316L	0,035	0,75	2	16 - 18	10 - 15	2 - 3	0,03	0,04
TP321	0,08	0,75	2	17 - 20	9 - 13	-	0,03	0,04

BACK